Home > Paper Handling > Load Paper > Load Paper in the Multi-purpose Tray (MP Tray) > Load Cut-Sheet
Paper, Photo Paper, or Envelopes in the Multi-purpose Tray (MP Tray)
Load Cut-Sheet Paper, Photo Paper, or Envelopes in the Multi-purpose
Tray (MP Tray)
Related Models: MFC-J3940DW
Use the MP tray for special print media, such as photo paper or envelopes.
• If the [Check Paper] setting is set to [On] and you set the paper in the MP tray, a message appears on
the LCD, allowing you to change the paper size and paper type.
• When you load a different paper size in the tray, you must change the Paper Size setting in the machine or
the paper size setting on your computer.
Doing this enables the machine to automatically feed paper from the appropriate tray if Auto Tray Select
has been set in the printer driver (Windows) or on the machine.
NOTE
• To prevent dust from entering the machine, be sure to close the MP tray if you are not using it.
1. Open the MP tray.
When you want to load paper larger than A4 or Letter size paper, pull up the paper support using both
hands until it locks into place.
45
To Next Page
Loading...
