Brother MFC-J410 - Page 11

11
Windows
®
USB
Windows
®
Macintosh
USB
16
Connect the USB cable
a Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
b Connect the USB cable to the USB socket
marked with a symbol. You will find the
USB socket inside the machine as shown
below.
c Carefully guide the USB cable through the
trench as shown below, following the trench
around and toward the back of the machine.
Then connect the cable to your computer.
d Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down b and close the scanner cover c.
USB
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
1
3
2
2