4
4
Set your country (For
Australia/New Zealand
Customer Only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
a Check that the power is turned on by
connecting in the power cord.
b Press a or b to choose your country
(Australia or New Zealand), and press
OK.
c
If the LCD shows the correct country, press
a
or
b
to select
Yes
, and press
OK
. Then go to step
d
.
Or press
a
or
b
and to select
No
, and press
OK
.
Then go back to step
b
and choose the country
again.
d
After the LCD shows
Accepted
for a few
seconds, the machine will restart automatically.
After the restart, the LCD shows
Please Wait
.
The telephone line cord MUST be connected
to the socket on the machine marked LINE.
If you are sharing one telephone line with an
external telephone, connect it as shown below.
1 Extension telephone
2 External telephone
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Set the receive mode to External TAD if
you have an external answering machine.
See Choose a Receive Mode on page 7.
For additional details, see Connecting an
external TAD (telephone answering device)
in chapter 6 in the Basic User’s Guide.
Set Country
Australia
New Zealand
Australia
Yes
No
To Next Page
Loading...
