9
(MFC-J4710DW)
When changing the lower tray size from the Ledger, A3 or Legal size to the original size, be
careful not to pinch your fingers in the gaps or slots in the bottom of the tray. It may cause injury
to you.
DO NOT touch the area shaded in the illustration. Doing this may cause injury to your fingers by
cutting them on the edge of the machine.
DO NOT carry the machine by holding the scanner cover, the Jam Clear Cover, the manual feed
slot cover, or the control panel. Doing this may cause the machine to slip out of your hands.
Carry the machine by sliding your hands into the handhold indentations located on each side of
the machine.
To Next Page
Loading...
Need help?
General
