Brother MFC-J4510DW - Set the Date and Time

7
9
Set the date and time
a Press .
b Press (Date and
Time).
c Press Date.
d Enter the last two digits of the year on the
Touchscreen, and then press OK.
e Repeat for month and day.
f Press Time.
g Enter the time on the Touchscreen in 24-hour
format.
h Press OK, and then press .
10
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Press Station ID.
e Press Fax.
f Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
g Press Name.
h Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
i Press .
11
Set Tone or Pulse dialling
mode
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Press Tone/Pulse.
e Press Pulse (or Tone).
f Press .
12
Set the telephone line
type
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Swipe up or down, or press a or b to display
Phone Line Set.
Press Phone Line Set.
e Press Normal, PBX or ISDN.
Press the desired telephone line type.
f Press .
00:00 01.01.2012
NOTE
If you choose PBX the machine will then ask you
to set the Dial Prefix. uuBasic User’s Guide:
Setting the Telephone Line Type