Brother MFC-J4510DW - Page 39

Loading paper
25
2
Loading Photo and Photo L paper 2
a Before loading, press the corners and
sides of the Photo and Photo L paper to
make them as flat as possible.
IMPORTANT
If Photo (4  6 in.) or Photo L (3.5  5in.)
paper is “double-feeding,” put one sheet of
Photo or Photo L paper in the paper tray at
a time.
b Do one of the following:
 If you put Photo L (3.5  5 in.) in the
paper tray, lift up the Photo L
stopper (1).
 If you put Photo (4  6 in.) in the
paper tray, lift up the Photo
stopper (2).
Gently press and slide the paper
guides (3) to fit the paper size.
c Close the output paper tray cover.
d Put Photo or Photo L paper in the paper
tray print side down.
e Open the output paper tray cover (1).
f Gently adjust the paper guides (1) to fit
the paper.
Make sure the paper guides touch the
sides of the paper.
g Close the output paper tray cover.
1
2
3
3
1
1