Brother MFC-J4510DW - Stop Faxing; Setting Scanner Glass Size for Faxing; Color Fax Transmission; Canceling a Fax in Progress

Chapter 4
50
f When the Touchscreen asks you
Next page?, do one of the following:
 To send a single page, press No.
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
Stop faxing 4
To stop faxing, press .
Setting scanner glass size for
faxing 4
When documents are A4 size, you need to
set the Scan Size to A4. If you do not, the
bottom portion of the faxes will be missing.
a Load your document.
b Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Glass Scan Size.
e Press Glass Scan Size.
f Press A4 (or Letter).
g Press OK.
h Enter the fax number.
i Press Fax Start.
NOTE
• You can save the setting you use most
often by setting it as the default setting.
(See Advanced User’s Guide: Setting
your changes as the new default.)
• This setting is only available for sending
documents from the scanner glass.
Color fax transmission 4
Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the machine’s
memory. When you send a color fax, the
machine will send it in real time (even if
Real Time TX is set to Off).
a Load your document.
b Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Color Setting.
e Press Color Setting.
f Press Color.
g Press OK.
h Enter the fax number.
i Press Fax Start.
Canceling a fax in progress 4
If you want to cancel a fax while the machine
is scanning, dialing or sending, press .