EasyManuals Logo

Brother MFC-J5730DW User Manual

Brother MFC-J5730DW
814 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #618 background imageLoading...
Page #618 background image
Error Message Cause Action
Unable to Print XX
A foreign object, such as a paper clip or a
piece of ripped paper, is in the machine.
continues, disconnect the machine from
the power for several minutes, and then
reconnect it.
You can try additional paper jam clear
operations.
See Related Information: Remove Paper
Scraps.
(If you cannot print received faxes,
transfer them to another fax machine or to
your computer.)
See Related Information: Transfer Your
Faxes or Fax Journal Report.
Unable to Scan XX
The machine has a mechanical problem. Disconnect the machine from the power
for several minutes, and then reconnect it.
(If you cannot print received faxes,
transfer them to another fax machine or to
your computer.)
See Related Information: Transfer Your
Faxes or Fax Journal Report.
Unusable Device
Disconnect device
from front connector
& turn machine off &
then on
A broken device is connected to the USB
direct interface.
Unplug the device from the USB direct
interface, then press to turn the
machine off and then on again.
Unusable Device
Please disconnect USB
device.
A USB device or USB flash drive that is
not supported has been connected to the
USB direct interface.
Unplug the device from the USB direct
interface. Turn the machine off and then
on again.
Wrong Ink Cartridge
The ink cartridge model number is not
compatible with your machine.
Verify whether the cartridge model
number will work with your machine.
Wrong Ink Colour
An ink cartridge has been installed in the
wrong position.
Check which ink cartridges are not
matched by colour to their ink cartridge
positions and move them to their correct
positions.
Wrong Tray Settings
The machine's Paper Size and Tray Use
settings do not match the size of paper in
the tray you are using.
Follow the instructions on the
Touchscreen and try to print again.
Configure the paper size setting for the
tray according to the LCD instructions.
MFC-J2730DW/MFC-J5730DW/MFC-J5930DW
Error Message
Cause Action
Black and White Print
Only
Replace ink.
One or more of the colour ink cartridges
have reached the end of their lives.
You can use the machine in monochrome
mode for approximately four weeks
depending on the number of pages you
print.
While this message appears on the
Touchscreen, each operation works in the
following way:
Printing
If the media type is set to Plain Paper
in the Basic tab, and Greyscale is
chosen in the Advanced tab of the
Replace the ink cartridges.
See Related Information: Replace the Ink
Cartridges.
Although the Cause column lists options
for using the machine after this error
appears, you may not be able to use the
machine until you replace the ink
cartridge(s) under the following
conditions:
If you unplug the machine or remove
the ink cartridge.
If you select the Slow Drying Paper
option on the machine or in the printer
driver.
611

Table of Contents

Other manuals for Brother MFC-J5730DW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J5730DW and is the answer not in the manual?

Brother MFC-J5730DW Specifications

General IconGeneral
Duplex printingYes
Print technologyInkjet
Maximum resolution1200 x 4800 DPI
Print speed (ISO/IEC 24734) mono22 ipm
Print speed (ISO/IEC 24734) color20 ipm
Time to first page (black, normal)6 s
Duplex print speed (ISO/IEC 24734) mono12 ipm
Duplex print speed (ISO/IEC 24734) color11 ipm
Print speed (black, normal quality, A4/US Letter)35 ppm
Print speed (color, normal quality, A4/US Letter)27 ppm
Copier resize25 - 400 %
Maximum copy resolution600 x 600 DPI
Copy speed (black, normal quality, A4)12 cpm
Copy speed (color, normal quality, A4)9 cpm
Scan toE-mail, E-mail Server, FTP, File, Image, OCR, USB
Scanner typeFlatbed & ADF scanner
Input color depth48 bit
Maximum scan area210 x 297 mm
Output color depth24 bit
Scan speed (color)14 ppm
Maximum scan resolution19200 x 19200 DPI
Duplex scan speed (color)10 ppm
Optical scanning resolution1200 x 1200 DPI
FaxingMono faxing
Fax memory200 pages
Modem speed33.6 Kbit/s
Fax speed dialing (max numbers)100
DisplayLCD
Control typeTouch
Product colorBlack
Display diagonal3.66 \
Market positioningBusiness
Internal memory256 MB
Card reader integratedNo
Sound pressure level (printing)50 dB
Standard interfacesEthernet, USB 2.0, Wireless LAN
USB 2.0 ports quantity1
Package depth469 mm
Package width639 mm
Package height511 mm
Package weight24300 g
Power consumption (off)0.04 W
Power consumption (sleep)1.6 W
Power consumption (standby)6.5 W
Power consumption (average operating)30 W
Sustainability certificatesBlue Angel, ENERGY STAR
Email protocolsAPOP, POP3
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology10/100Base-T(X)
Security algorithms64-bit WEP, 128-bit WEP, 802.1x RADIUS, APOP, EAP-FAST, EAP-MD5, EAP-TLS, EAP-TTLS, HTTPS, IPPS, PEAP, SMTP-AUTH, SNMP, SSL/TLS, WPA-PSK, WPA2-PSK
Ethernet LAN data rates10, 100 Mbit/s
Mobile printing technologiesApple AirPrint, Mopria Print Service
Paper input typePaper tray
Total input capacity250 sheets
Total output capacity100 sheets
Maximum input capacity500 sheets
Total number of input trays2
Auto document feeder (ADF) input capacity50 sheets
Digital sender-
Maximum duty cycle- pages per month
Paper tray media typesPlain paper, Thin paper
ISO A-series sizes (A0...A9)A3, A4
Maximum ISO A-series paper sizeA3
Bundled softwareBrother Control Center 4 Nuance PaperPort 14
Harmonized System (HS) code84433100
Weight and Dimensions IconWeight and Dimensions
Depth398 mm
Width530 mm
Height374 mm

Related product manuals