Brother MFC-J650DW - Setting Your Changes as the New Default; Restoring All Settings to the Factory Settings

Making copies
53
7
Setting your changes as the
new default 7
You can save the settings for the copy
options you use most often—such as
Quality, Enlarge/Reduce, Density,
Page Layout, 2-sided Copy and
Advanced Settings—by setting them as
the defaults.
These settings will remain until you change
them again.
a Press (Copy).
b Press Options.
c Press a or b on the Touchpanel to
display the available settings, and then
press the setting you want to change.
Press a or b to display the available
options, and press the option you want
to set. Repeat this step for each setting
you want to change.
d After changing the last setting, press a
or b to display Set New Default.
e Press Set New Default.
f The Touchscreen asks you again to
confirm that you want to set the changes
as the new default settings.
Press Yes.
g Press .
Restoring all settings to the
factory settings 7
You can restore the copy settings that you
have changed—such as Quality,
Enlarge/Reduce, Density,
Page Layout, 2-sided Copy and
Advanced Settings—to the default
factory settings.
a Press (Copy).
b Press Options.
c Press a or b on the Touchpanel to
display Factory Reset.
d Press Factory Reset.
e Press Yes.
f Press .