82
• Make sure the plastic tab on the left side
of the orange protective part (1) locks
securely into place (2).
• If you are not able to find the orange
protective part, ship the machine without
it. DO NOT install the ink cartridges as an
alternative before shipping.
h (MFC-J870DW and MFC-J875DW)
Open the document cover and make
sure the Disc Tray is in its storage
space, and then close the document
cover.
i Wrap the machine in the bag.
j Pack the machine and the printed
materials in the original carton with the
original packing material as shown in
the illustration.
Do not pack the used ink cartridges in
the carton.
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts and printed materials to use with
your “Exchange” machine.
k Close the carton and tape it shut.
To Next Page
Loading...
