7
d Gently press and slide the paper length
guide a to fit the paper size.
Make sure that the triangular marks b on the
paper length guide a lines up with the mark for
the paper size you are using.
e Close the output paper tray cover.
f Fan the stack of paper well to avoid paper jams
and misfeeds.
g Gently put the paper into the paper tray (for
MFC-J6720DW, tray #1).
h Gently adjust the paper side guides to fit the
paper with both hands. Make sure that the
paper side guides touch the sides of the paper.
i Check that the paper is flat in the tray and
below the maximum paper mark a .
Always make sure that the paper is not curled or
wrinkled.
Make sure the paper is flat in the tray. If the paper
is pushed against the back of the tray, it may
cause paper feed problems.
To Next Page
Loading...
