Brother MFC-J6920DW - Set the Time Zone; Automatic Daylight Saving Time

12
14
Set the telephone line
compatibility (VoIP)
If you are connecting the machine to a VoIP service
(over the Internet), you need to change the
compatibility setting.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Swipe up or down, or press a or b to display
Compatibility.
Press Compatibility.
e Press Basic(for VoIP).
f Press .
15
Automatic Daylight
Saving Time
You can set the machine to change automatically for
Daylight Saving Time. It will reset itself forward one
hour in the spring and backward one hour in the
autumn.
a Press .
b Press
(Date and Time).
c Press Auto Daylight.
d Press On (or Off).
e Press .
16
Set the Time Zone
You can set the time zone for your location on the
machine.
a Press .
b Press
(Date and Time).
c Press Time Zone.
d Enter your time zone.
Press OK.
e Press .
NOTE
If you are using an analogue telephone line, you
can skip this step.
00:00 01.01.2013
00:00 01.01.2013