Brother MFC-J6920DW - Setting the Date and Time

Routine maintenance
105
A
Setting the date and
time
A
The Touchscreen displays the date and time.
If it is not current, re-enter it here.
You can add the date and time to each fax
you send by setting your Station ID.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Initial Setup.
d Press Initial Setup.
e Press Date & Time.
f Press Date.
g Enter the last two digits of the year on
the Touchscreen, and then press OK.
h Enter the two digits for the month on the
Touchscreen, and then press OK.
i Enter the two digits for the day on the
Touchscreen, and then press OK.
j Press Clock Type.
k Press 12h Clock or 24h Clock.
l Press Time.
m To enter the time, do one of the
following:
 If you chose 12h Clock in step k,
enter the time (in 12-hour format)
using the keyboard on the
Touchscreen, and then press
AM or PM.
Press OK.
 If you chose 24h Clock in step k,
enter the time (in 24-hour format)
using the keyboard on the
Touchscreen.
Press OK.
(For example, enter 19:45 for
7:45 PM.)
n Press .