Chapter 2
28
Loading envelopes 2
a Before loading, press the corners and
sides of the envelopes to make them as
flat as possible.
If envelopes are “double-feeding,” put one
envelope in the paper tray at a time.
b Gently press and slide the paper side
guides to fit the paper size.
c Put envelopes in tray #1 with the
printing surface face down. If the
envelope flaps are on the long edge,
load the envelopes with the flap on the
left, as shown in the illustration.
Gently adjust the paper side guides (1)
to fit the size of the envelopes.
To Next Page
Loading...
