Brother MFC-J835DW Quick Setup Guide

43
For Network Users
Reset the network settings to factory default
To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.
a Make sure the machine is not operating, then disconnect all the cables from the machine (except the power
cord).
b Press Menu.
c Press Network.
d Press a or b to display Network Reset and press Network Reset.
e Press Yes.
f Hold down Yes for 2 seconds to confirm.
g The machine will restart, re-connect cables once this is complete.
Entering Text for Wireless Settings
Up to four letters are assigned to each letter button on the Touchscreen. By pressing the correct button repeatedly,
you can access the character you want.
Press to cycle between letters, numbers and special characters. (The characters available may differ
depending on your country.)
Inserting spaces
To enter a space, press then press the space button or .
Making corrections
If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect
character, press . Re-enter the correct character. You can also back up and insert a character.
Repeating characters
If you need to enter a character that is on the same button as the character before, press c to move the cursor to
the right before you press the button again.

Brother MFC-J835DW Specifications

General

Printer Type	Inkjet
Functions	Print, Copy, Scan, Fax
Print Resolution	Up to 6000 x 1200 dpi
Print Speed (Black)	Up to 12 ppm
Print Speed (Color)	Up to 10 ppm
Duplex Printing	Yes
Wireless	Yes
Fax Modem Speed	14.4 kbps
Connectivity	USB, Ethernet, Wi-Fi
Paper Handling	100-sheet input tray
Automatic Document Feeder	Yes, 20 pages
Operating System Compatibility	Windows, macOS
Mobile Printing	Apple AirPrint, Google Cloud Print, Brother iPrint&Scan
Scanner Type	Flatbed, ADF
Maximum Scan Resolution	1200 x 2400 dpi
Ink Cartridges	Black, Cyan, Magenta, Yellow
Display	2.7" Touchscreen Color LCD