Brother MFC-J895DW - Page 579

Level 1 Level 2 Level 3 Descriptions
Setup Receive Remote Codes
- Answer calls at an extension or external telephone
and use codes to turn on or off the Remote Codes.
You can personalize the codes.
Auto Reduction
- Reduce the size of incoming faxes.
PC Fax Receive
- Set the machine to send faxes to your computer.
You can turn on the Backup Print safety feature.
Fax Rx Stamp
- Print the received time and date on the top of received
faxes.
Report Setting Transmission
- Select the initial setup for the Transmission
Verification Report.
Journal Period
- Set the interval for automatic printing of the Fax
Journal.
If you select an option other than Off and Every 50
Faxes, you can set the time for the option.
If you select Every 7 Days, you can set the day of the
week.
Print Fax
- - Print received faxes stored in the machine's memory.
Remaining Jobs
- - Check which scheduled jobs are in the machine's
memory and cancel selected jobs.
Miscellaneous TX Lock
- Prohibit most functions except receiving faxes.
Distinctive
(USA and Canada
only)
Distinctive
Turn on the telephone company's Distinctive Ring
subscriber service to register your new ring pattern on
the machine.
Ring Pattern
Area Code
(USA only)
- Set your 3-digit area code only if you do not dial it
within your own area code.
Settings > [Network]
Level 1
Level 2 Level 3 Descriptions
WLAN TCP/IP BOOT Method
Select the BOOT method that best suits your
needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
Node Name
Enter the Node name.
WINS
Configuration
Select the WINS configuration mode.
WINS Server
Specify the IP address of the primary or
secondary WINS server.
DNS Server
Specify the IP address of the primary or
secondary DNS server.
APIPA
Set the machine to allocate the IP address from
the link-local address range automatically.
IPv6
Turn the IPv6 protocol on or off. For more
information, go to the Brother Solutions Center at
support.brother.com to see FAQs &
Troubleshooting.
Setup Wizard
- Configure your wireless network settings
manually.
572