To Next PageTo Next PageWhy does my Brother MFC-L2701D say 'No Paper'?
The 'No Paper' message on your Brother printer indicates that the machine is out of paper, or the paper is not loaded correctly in the paper tray. Refill the paper in the paper tray, ensuring the paper guides are set to the correct size. Alternatively, remove the paper and load it again, making sure the paper guides are correctly adjusted, and avoid overfilling the paper tray.
What to do if my Brother MFC-L2701D says 'Jam Inside'?
If your Brother printer displays 'Jam Inside', open the front cover and remove the toner cartridge and drum unit assembly. Then, pull out the jammed paper. Close the front cover. If the error message remains, press Start.
Why is 2-sided printing disabled on my Brother MFC-L2701D Printer?
2-sided printing is disabled on your Brother printer because the back cover of the machine is not closed completely. Close the back cover of the machine until it locks in the closed position.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Technology | Laser |
| Print Speed (Black) | 30 ppm |
| Print Resolution | Up to 2400 x 600 dpi |
| Automatic Duplex Printing | Yes |
| Scanner Type | Flatbed, ADF |
| Scanner Resolution | 1200 x 1200 dpi |
| Copy Speed (Black) | 30 cpm |
| Automatic Document Feeder (ADF) | Yes |
| ADF Capacity | 35 sheets |
| Paper Capacity | 250 sheets |
| Memory | 32 MB |
| Type | Laser |
| Connectivity | USB 2.0, Ethernet |
| Display | LCD |
| Max Paper Size | A4 |
| Weight | 20.9 lbs |
Details the functions of various buttons and the LCD display on the control panel.
Explains how to launch the Brother Utilities application for accessing installed software.
Guides through initial setup procedures like date, time, and volume adjustments.
Guides on how to load paper into the paper tray.
Explains how to set the paper size check function.
Instructions to change the paper size setting.
Instructions to set the paper type for optimal print quality.
Advice and warnings on using special types of paper.
Steps to print a document from a Windows computer.
Instructions for printing on both sides of the paper.
How to print multiple pages on one sheet.
Guidelines for printing on special media like envelopes.
How to print on various paper types using the manual feed slot.
Steps to copy a document using the ADF or scanner glass.
Details various copy settings like quality, brightness, contrast.
Guide to copying multiple pages onto both sides of the paper.
Steps to copy a 2-sided document using the scanner glass.
How to use the 2in1 (ID) Copy feature for identification cards.
General instructions for scanning documents to a computer.
Steps to save scanned files as PDFs using ControlCenter4.
How to scan using the dedicated scan button on the machine.
Instructions to set the Station ID for fax transmissions.
How to adjust settings for line compatibility and VoIP.
Explains different modes for receiving faxes (Fax Only, Fax/Tel).
Guides on selecting the appropriate receive mode based on line setup.
How to set the F/T ring time for distinguishing fax and voice calls.
How to configure the number of rings before the machine answers.
Instructions for storing frequently used numbers.
Instructions for storing numbers using speed dial codes.
How to modify or remove stored One Touch dial numbers.
How to modify or remove stored Speed Dial numbers.
Information on using services like Voice Mail, VoIP, and TAD.
Step-by-step guide on how to send a fax.
How to send and receive faxes using a computer.
Initial checks and steps to identify machine problems.
Explains common error messages and their solutions.
Guides on how to find and clear document and paper jams.
Troubleshooting steps for fax and telephone connectivity issues.
Solutions for various fax sending and receiving difficulties.
Steps to resolve issues with printing or scanning.
Instructions for entering text using the machine's controls.
Information on replacing consumables like toner and drum units.
