To Next PageTo Next PageHow to resolve 'Size Error DX' on Brother All in One Printer?
To resolve the 'Size Error DX' on your Brother All in One Printer, press Stop/Exit. Choose a paper size supported by 2-sided printing. Alternatively, the paper in the tray is not the correct size and is not available for automatic 2-sided printing, load the correct size of paper in the tray and set the tray for that paper size.
What to do when Brother All in One Printer says 'Toner Ended'?
When your Brother All in One Printer displays 'Toner Ended', it means the toner cartridge is at the end of its life. Replace the toner cartridge with a new one.
What to do if my Brother All in One Printer says 'Jam Inside'?
If your Brother All in One Printer displays 'Jam Inside', open the front cover and remove the toner cartridge and drum unit assembly. Then, pull out the jammed paper. Finally, close the front cover. If the error message remains, press Start.
Why does my Brother All in One Printer show a 'Size mismatch' error?
A 'Size mismatch' error on your Brother All in One Printer indicates that the paper in the tray is not the correct size. Load the correct size of paper in the tray and set the size of paper to the tray.
What does 'Toner Low' mean on my Brother All in One Printer?
If your Brother All in One Printer's LCD displays 'Toner Low', you can still print. Order a new toner cartridge now so you have it ready when the LCD displays 'Replace Toner'.
Why does my Brother All in One Printer say 'Manual Feed'?
The 'Manual Feed' message on your Brother All in One Printer indicates that Manual was selected as the paper source in the printer driver when there was no paper in the manual feed slot. Place paper in the manual feed slot.
What does 'Drum !' mean on my Brother All in One Printer and how do I fix it?
The 'Drum !' message on your Brother All in One Printer means that either the corona wire on the drum unit must be cleaned, or the drum unit or the toner cartridge and drum unit assembly is not installed correctly. Clean the corona wire on the drum unit. Alternatively, put the toner cartridge in the drum unit, then reinstall the toner cartridge and drum unit assembly in the machine.
Why is my Brother All in One Printer saying 'No Toner'?
The 'No Toner' message on your Brother All in One Printer indicates that the toner cartridge is not installed or is not installed correctly. Remove the drum unit and toner cartridge assembly. Install the toner cartridge in the drum unit correctly. Reinstall the toner cartridge and drum unit assembly in the machine. If the problem continues, replace the toner cartridge.
Why does my Brother All in One Printer say 'No Paper'?
The 'No Paper' message on your Brother All in One Printer indicates that the machine is out of paper, or the paper is not loaded correctly in the paper tray. Refill paper in the paper tray, making sure the paper guides are set to the correct size. Alternatively, remove the paper and load it again, ensuring the paper guides are correctly set and that you do not overfill the paper tray.
How do I fix a 'Jam 2-sided' error on my Brother All in One Printer?
To resolve a 'Jam 2-sided' error on your Brother All in One Printer, pull the paper tray and the 2-sided tray out completely, open the back cover and then remove the jammed paper. Close the back cover, and put the paper tray and the 2-sided tray firmly back in the machine.
General| Print Technology | Laser |
|---|---|
| Print Resolution | Up to 2400 x 600 dpi |
| Duplex Printing | Yes |
| Paper Capacity | 250 sheets |
| Functions | Print, Copy, Scan, Fax |
| Fax Speed | 33.6 Kbps |
| Memory | 64 MB |
| Print Speed | 30 ppm |
| Connectivity | USB 2.0, Ethernet, Wi-Fi |
| Mobile Printing | Brother iPrint&Scan, Google Cloud Print, AirPrint |
| Maximum Scan Resolution | 1200 x 1200 dpi |
| Copy Speed | 30 cpm |
| Toner Yield | Approx. 1, 200 pages (standard), Approx. 3, 000 pages (high-yield) |
| Monthly Duty Cycle | Up to 10, 000 pages |
| Dimensions | 410 x 398.5 x 318.5 mm |
Register your product online for warranty confirmation and special offers.
Access FAQs and troubleshooting tips for your Brother product.
Find the location of an authorized Brother service center in the USA.
Find the location of an authorized Brother service center in Canada.
Download the latest drivers and firmware for optimal machine performance.
Instructions for finding and accessing the user manual on your computer.
Find FAQs and troubleshooting tips on the Brother Solutions Center website.
Explanation of warning symbols, icons, and text formatting used in the guide.
Essential setup steps before sending or receiving faxes.
Configure Station ID, fax/telephone numbers, and name for outgoing faxes.
Store and manage One Touch and Speed Dial numbers for quick dialing.
Connect and configure external devices and services for fax line sharing.
Step-by-step guide to sending faxes using the machine's control panel.
Send and receive faxes directly from your computer using PC-FAX software.
Detailed explanation of the buttons and display on the machine's control panel.
Explanation of messages and information displayed on the machine's LCD screen.
How to switch between FAX, SCAN, and COPY modes using dedicated buttons.
Functions of buttons like Options, 2 in 1 Copy, and 2-sided Copy.
Using Menu, OK, Clear, and navigation buttons to access settings.
Functions of the dial pad for dialing and text entry.
Instructions for turning the machine on and off, including shutdown procedures.
How to stop an operation or exit from a menu.
Initiating fax, copy, or scan operations.
How to turn the DCP-L2520DW/DCP-L2540DW machine on and off.
Using the Options and 2 in 1 (ID) Copy buttons.
Switching the machine to Scan Mode on DCP models.
Setting up a wireless connection for DCP models.
Explanation of messages and information displayed on the DCP model's LCD.
Using Menu, OK, Clear, and navigation buttons on DCP models.
How to stop an operation or exit from a menu on DCP models.
Initiating copy or scan operations on DCP models.
Configure the machine's internal clock for accurate date and time stamping.
Set the volume level for incoming telephone calls.
Set the volume level for machine beeps and alerts.
Set the volume level for the machine's speaker.
Instructions for properly loading paper into the machine's paper tray.
Configure the machine to alert when the paper size in the tray changes.
Adjust the machine's paper size setting to match loaded paper.
Set the machine for optimal print quality based on paper type used.
Step-by-step guide to printing a document from a Windows computer.
How to perform automatic duplex printing from Windows.
Configure print jobs to place multiple pages on a single sheet of paper.
Step-by-step guide to making copies using the machine.
Scan documents and photos using Brother's software on Windows.
Save scanned documents and photos to a folder as PDF files using ControlCenter4.
Initial steps to diagnose and identify the cause of a machine problem.
Identifying the location of jammed documents or paper within the machine.
Step-by-step guide to remove jammed documents from the ADF and cover.
Instructions for removing jammed paper from the paper tray and output tray.
Guides for entering text and characters using the machine's dial pad.
Instructions for entering special characters, symbols, and spaces.
