Brother MFC-L8600CDW - Receiving a fax; Receive modes; Choosing the receive mode

Loading paper
33
2
Paper Tray Capacity 2
1
Folio size is 215.9 mm  330.2 mm.
2
Load only one sheet of Glossy in the MP tray.
Recommended paper specifications 2
The following paper specifications are appropriate for this machine.
 Use plain paper that is appropriate for laser/LED machines to make copies.
 Use paper that is 75 to 90 g/m
2
.
 Use long grain paper with a neutral Ph value, and a moisture content of approximately 5%.
 This machine can use recycled paper that meets DIN 19309 specifications.
Paper size Paper types No. of sheets
Multi-purpose tray
(MP tray)
Width: 76.2 to 215.9 mm
Length: 127 to 355.6 mm
Plain paper, Thin paper,
Thick paper,
Thicker paper,
Recycled paper,
Bond paper, Labels,
Envelopes, Env. Thin,
Env.Thick and Glossy
paper
2
up to 50 sheets
(80 g/m
2
)
3 Envelopes
1 Glossy paper
Standard paper tray
(Tray 1)
A4, Letter, Legal,
B5 (JIS), Executive, A5,
A5 (Long Edge), A6,
Folio
1
Plain paper, Thin paper
and Recycled paper
up to 250 sheets
(80 g/m
2
)
Optional lower tray
(Tray 2)
A4, Letter, Legal,
B5 (JIS), Executive, A5,
Folio
1
Plain paper, Thin paper
and Recycled paper
up to 500 sheets
(80 g/m
2
)
Basis weight
75-90 g/m
2
Thickness 80-110 m
Roughness Higher than 20 sec.
Stiffness
90-150 cm
3
/100
Grain direction Long grain
Volume resistivity
10e
9
-10e
11
ohm
Surface resistivity
10e
9
-10e
12
ohm-cm
Filler
CaCO
3
(Neutral)
Ash content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%