Editing Stitch Patterns
D-8
C Some of the following keys will appear, depending on the selected stitch pattern.
Elongation key When 7mm satin stitch patterns are selected, press this key to choose from 5
automatic length settings, without changing the stitch zigzag width or stitch length
settings.
D-9
Thread density key After selecting the stitch pattern, use this key to change the thread density of the
pattern.
D-10
Character spacing key Press this key to change the spacing of character patterns. D-3
D
Step stitch keys Use these keys to make step stitch patterns. D-3
E Delete key When you make a mistake selecting a stitch pattern, use this key to delete the
mistake. When you make a mistake in combining stitch patterns, use this key to
delete stitch patterns.
D-2,
D-3
F Manual adjustment key Press this key to change the stitch length, stitch width, “L/R Shift” or thread tension.
For details, refer to “Setting the Stitch” in the “Basic operations” section.
–
No. Display Key Name Explanation Page
To Next Page
Loading...
