Names of Machine Parts and Their Functions
B-6
Included accessories
Included accessories may differ from the table below depending on the machine model you purchased. For more details on
included accessories and their part codes of your machine, refer to the Quick Reference Guide.
* These accessories are included in the same box as the embroidery unit.
1. 2. 3. 4. 5. 6.
Zigzag foot “J” (on machine) Monogramming foot “N” Overcasting foot “G” Zipper foot “I” Blind stitch foot “R” Button fitting foot “M”
7. 8. 9. 10. 11. 12.
Buttonhole foot “A” Embroidery foot “U” Open toe foot Free motion open toe
quilting foot “O”
Non stick foot Stitch guide foot “P”
13. 14. 15. 16. 17. 18.
Adjustable zipper/piping foot Needle set
75/11 2 needles, 90/14 2
needles, 90/14 2 needles: Ball
point needle (gold colored)
Twin needle
2.0/11 needle
Bobbin (4)
One is on machine.
Seam ripper Scissors
19. 20. 21. 22. 23. 24.
Cleaning brush Eyelet punch Screwdriver (large) Screwdriver (small) L-shaped screwdriver Disc-shaped screwdriver
25. 26. 27. 28. 29. 30.
Horizontal spool pin Spool cap (large) Spool cap (medium) (2)
One is on machine.
Spool cap (small) Thread spool insert
(mini king thread spool)
Spool net
31. 32. 33.* 34. 35.*
Knee lifter Standard bobbin case (green
marking on the screw)
(on machine)
Alternate bobbin case (no
color on the screw)
Foot controller Embroidery frame set (extra large)
26 cm (H) × 16 cm (W) (10-1/4 inches (H) × 6-1/4 inches (W))
36.* 37.* 38. 39. 40.
Embroidery frame set (large)
18 cm (H) × 13 cm (W) (7 inches (H) × 5 inches (W))
Embroidery bobbin thread
(60 weight, white)
Accessory bag Hard case Grid sheet set
41. 42. 43.
Operation Manual Quick Reference Guide Embroidery Design Guide
N
M
O
P
www.SewingSupplyWarehouse.com