Brother NQ3500D - Adjusting Input Sensitivity for Operation Keys

LCD Operation
B-16
■ Choosing the display language
a
Press .
b
Display page 8.
c
Use and to choose the display language.
1 Display language
d
Press to return to the original screen.
Adjusting input sensitivity for operation keys
You can adjust the sensitivity of the operation keys to five
levels. Display the settings screen to set desired level.
1 Operation keys
a
Press to display the settings screen.
b
Display page 9 by pressing / .
c
Press “Start”.
→ The adjusting screen is displayed.
d
Adjust the “Input Sensitivity” by pressing / .
• The higher the setting, the more sensitive the keys
will be. The default setting is “3”.
e
Press to return to previous screen.
■ If the machine does not respond when an
operation key is pressed
Hold down (Thread cutter button) and turn on the
machine to reset the settings. Display the settings screen,
and then adjust the settings again.
1
1
Note
• We recommend selecting the highest setting if
an electrostatic touch pen is being used.