Brother NQ3500D - Editing Single Characters

Editing Character Patterns
Embroidering E-11
EMBROIDERY
E
c
Press to return to the font editing screen.
Editing single characters
Press so that a single character can be selected for editing.
The character size and font can be changed.
■ Changing the size
a
Press .
b
Select the character to be resized.
• To select the character, press or .
→ The selected character is surrounded with a red box.
c
Select the direction in which to change the size.
• For details on the various keys, refer to the procedure
in “Changing the size of the pattern” on page E-6.
d
Press to return to the font editing screen.
■ Changing the font
a
Press .
b
Press , and then select the character whose font is
to be changed.
• To select the character, press or .
→ The selected character is surrounded with a red box.
c
Select the font that you wish to use.
→ The character changes to the selected font.
d
Press to return to the font editing screen.