LCD Operation
B-12
■ Utility stitch screen ■ Utility stitch editing screen
No. Display Key Name Explanation Page
1 – Stitches Press the key for the pattern you want to sew. B-35
2 Pattern display size Show the approximate size of the pattern selected.
100%: Nearly the same size as the sewn pattern
50%: 1/2 the size of the sewn pattern
25%: 1/4 the size of the sewn pattern
The actual size of the sewn pattern may differ depending on the type of fabric and
thread that is used.
–
3 – Stitch preview Shows a preview of the selected stitch. Approximate size of the pattern selected
shows at the bottom of the stitch preview. When shown at 100%, the stitch appears
in the screen at nearly its actual size.
B-35
4 Presser foot Shows presser foot to be used. B-33
5 Needle position setting Shows single or twin needle mode setting, and the needle stop position.
: Single needle/down position
: Single needle/up position
: Twin needle/down position
: Twin needle/up position
B-13
6 Stitch width Shows the stitch width of the currently selected stitch pattern. B-40
7 Stitch length Shows the stitch length of the currently selected stitch pattern. B-40
8 L/R Shift Shows the tendency of left/right of the center line for the original zigzag stitch. B-41
9 Thread tension Shows the automatic thread tension setting for the currently selected stitch pattern. B-41
0 Manual adjustment key Press this key to display the following manual adjustment screen.
You can adjust the value of each item by pressing / .
1 Press to save stitch settings to machine memory (Width/Length/L/R Shift/
Tension).
2 Press to return the stitch settings to default.
B-42
A Page display Shows additional pages that can be displayed. –
B Edit/stitch switching key Press this key to switch to the utility stitch editing screen. –
C Image key Shows a preview of the sewn image. –
D Automatic thread cutting
key
Press this key to set the automatic thread cutting function. B-43
E Automatic reverse/
reinforcement key
Press this key to use the automatic reverse/reinforcement stitch function. B-38
F Pivot key Press this key to select the pivot function. B-44
G Single/repeat sewing key Press this key to choose single pattern or continuous patterns. Depending on the
selected stitch, this key may be disabled.
–
To Next Page
Loading...
