LCD Operation
B-14
■ Embroidery settings
A Select the embroidery frame to be used and displayed as a guide. For details, refer to “Changing the “Embroidery Frame
Display”” in the “Embroidering” section.
B When set to “ON”, the embroidery pattern can be selected according to the embroidery frame size that you have selected in
number
A. For details, refer to “Selecting/displaying patterns according to the embroidery frame size” in the “Embroidering”
section.
C Change the thread color display on the “Embroidery” screen; thread number, color name. (page B-65).
D When the thread number “#123” is selected, select from six thread brands. (page B-65).
E Adjust the maximum embroidery speed setting. For details, refer to “Adjusting the embroidery speed” in the “Embroidering”
section.
F Adjust the upper thread tension for embroidering. For details, refer to “Adjusting thread tension” in the “Embroidering” section.
G Select the height of the embroidery foot during embroidering. (page B-57).
H Change the color of the background for the embroidery display area. For details, refer to “Changing the background colors of the
embroidery patterns” in the “Embroidering” section.
I Change the color of the background for the thumbnail area. For details, refer to “Changing the background colors of the
embroidery patterns” in the “Embroidering” section.
J Press to specify the size of pattern thumbnails. For details, refer to “Specifying the size of pattern thumbnails” in the
“Embroidering” section.
K Change the display units (mm/inch).
Page 4 Page 5 Page 6
Page 7
To Next Page
Loading...
