50
3 Press .
4 Press .
5 Push down on the tape cutter lever to cut the stamp stencil film.
To affix a stamp:
6 Remove the stamp frame from around the stamp film holder ink pad, one
side at a time, then remove the protective seal covering the ink pad and the
backing paper from the stamp stencil film.
7 With the glossy side of the stamp stencil film upward, align one of its ends
with the slit on the side of the stamp film holder.
2:
1234 Main S _
1:
J. Smith
Alt
Caps
Auto
Font 1 Font 2
ABC
ABC
Length
1/1
COPIES
Alt
Caps
Auto
Font 1 Font 2
ABC
ABC
Length
To Next Page
Loading...
