63
FRAME FUNCTION
With the Frame function, you can choose from various frames and highlights to design a
more decorative or emphasized label.
The following Frame settings are available:
OFF, ROUND, BANNER, NAMEPLATE, VINE and DOT
The default frame setting is OFF; however, other settings are also available. When any
setting other than OFF is selected, the frame indicator ( ) on the right side of the dis-
play lights up.
Refer to
Reference
at the end of this section for samples of the available settings.
To change the frame setting:
1 While holding down , press once, and keep held down to dis-
play the current frame setting.
2 While still holding down , continue pressing until the desired frame
setting is displayed.
☞
The frame indicator
()
lights up when any setting other than OFF is
selected.
3 Release to apply the selected frame setting to the entire text.
EXAMPLE
To select the BANNER frame setting:
1 While holding down ,
press once, and keep
held down.
2 While still holding down ,
continue pressing until
BANNER is displayed.
3 Release .
ABC
Code
é
=
6
ABC
Code
Code
é
=
6
ABC
ABC
Code
OFF
FRAME
Alt
Caps
Auto
Font 1 Font 2
ABC
ABC
Length
Code
é
=
6
ABC
Code
BANNER
FRAME
Alt
Caps
Auto
Font 1 Font 2
ABC
ABC
Length
Code
é
=
6
ABC
Code
To Next Page
Loading...
