1
2
3
4
5
6
7
8
9
29
z EDITING A LABEL
Setting Label Attributes
Using the
Label
key, you can create a label with a frame around the text and specify
the label length and tab length. (Refer to “Setting Margin” on page 45.)
Press the
Label
key.
The current settings are displayed.
Select an attribute using the or key, and then set
a value for that attribute using the or key.
Press the
OK
or
Enter
key to apply the settings.
zFramesz
Setting Label Attributes
1
• When setting the tab length, hold down the or key
to change the value faster.
• When setting the label length, refer to “Adjusting the
Label Length” on page 47.
2
New settings are NOT applied if you do not press the
OK
or
Enter
key.
3
•Press the
Escape
key to return to the previous step.
•Press the
Space
key to set the selected attribute to the default value.
• Refer to the Setting Options table for a list of all available settings.
Attribute Value Result
Frame
Off
1
2
3
To Next Page
Loading...
