Why is my Brother Label Maker printing striped tape?
If striped tape appears when using your Brother Label Maker, it means you have reached the end of the tape. Replace the tape cassette with a new one.
Why is my Brother P-Touch 2450DX Label Maker not printing clearly?
If your Brother Label Maker isn't printing clearly or isn't printing at all, it could be due to a few reasons. First, ensure that the tape cassette has been inserted properly. If the tape cassette is empty, replace it with a new one. Also, check that the tape compartment cover has been fully closed.
What to do if Brother P-Touch 2450DX Label Maker display is blank?
If the display on your Brother Label Maker stays blank after you turn it on, try these steps: First, check that the AC adapter is connected correctly. If you're using alkaline batteries, make sure they are correctly inserted. If the batteries are low, replace them with new ones.
Why did my Brother P-Touch 2450DX Label Maker erase stored text files?
If the text files you stored in the memory of your Brother Label Maker are no longer there, it might be because the batteries are low. Replace them with new ones to prevent data loss.
How to fix Brother P-Touch 2450DX when printed characters are not formed properly?
If the printed characters on your Brother Label Maker are not forming properly, the alkaline batteries you are using may be low. Try using the AC adapter or replace the batteries with new ones.
What to do if Brother Label Maker has locked up?
If your Brother Label Maker has locked up (nothing happens when you press a key), turn off the machine. Then, while holding down the c and R keys, turn the machine back on. Note that this will erase the text and formats in the display and all text files stored in the memory.
Manufacturer's declaration that the P-touch 2450DX conforms to normative documents.
Overview of the P-touch machine's physical components.
Essential safety guidelines for operating the P-touch machine.
Instructions for installing and replacing AA alkaline batteries.
Guide on connecting and using the AC adapter for power.
Steps for changing the tape cassette.
Instructions for USB connection between P-touch and computer.
Procedures for installing P-touch Editor software and printer driver.
Operation of power key and navigation using cursor keys.
Using the navigation dial and special keys (Code, Alt, Shift).
Space, Return, Block, Tab, Delete, Clear functions.
Composite characters, accents, symbols, auto format.
Adjusting font, size, width, and style of text.
Underline, Frame, Tape Margin, Alignment, Mirror Print, Length.
Creating barcodes and sequential numbering for labels.
Auto Cut, Print key, Feed & Cut functions.
Storing, recalling, and deleting text files.
Solutions for common problems and explanations for error messages.
Technical details and information on available supplies.
General| Model | P-Touch 2450DX |
|---|---|
| Series | P-Touch |
| Device Category | Label Maker |
| Print Technology | Thermal Transfer |
| Print Resolution | 180 dpi |
| Print Speed | 10 mm/sec |
| Maximum Print Width | 12 mm |
| Keyboard | QWERTY |
| Display | LCD |
| Cutter | Automatic |
| Memory | Yes |
| Tape Sizes | 6 mm, 9 mm, 12 mm, 18 mm |
| Tape Type | TZ Tapes |
| Power Source | 6 x AA Batteries or AC Adapter |
To Next Page