What to do if my Brother Label Maker is not printing correctly or the characters are blurred?
If your Brother Label Maker isn't printing properly or the characters appear blurred, consider the following: First, ensure the tape cassette is correctly inserted. If the cassette is empty, replace it. Also, verify that the tape compartment cover is securely closed. Finally, check that the interface cable is properly connected.
What to do if my Brother P-touch 2600 display stays blank after turning it on?
If the display of your Brother Label Maker remains blank after you turn it on, check the following: Ensure that the AC adapter is correctly connected. If you're using alkaline batteries, make sure they are properly inserted. If the batteries are low, replace them with new ones.
What to do if my Brother Label Maker has locked up?
If your Brother Label Maker has locked up (nothing happens when you press a key), turn off the machine. Then, while holding down the 'c' and 'R' keys, turn the machine back on. Note that this will erase the text and formats in the display and all text files stored in the memory.
General| Model | P-touch 2600 |
|---|---|
| Print Technology | Thermal Transfer |
| Print Method | Thermal Transfer |
| Print Resolution | 180 dpi |
| Print Speed | 10 mm/sec |
| Label Widths Supported | 6 mm, 9 mm, 12 mm, 18 mm, 24 mm |
| Label Width | Up to 24 mm |
| Display | LCD |
| Keyboard | QWERTY |
| Cutter | Automatic |
| Weight | 640 g |
| Power Source | AC Adapter |
To Next Page