To Next PageTo Next PageWhy are the characters on my Brother P-touch 2600, 2610 Label Maker printing incorrectly?
If the printed characters from your Brother Label Maker are not formed properly, the alkaline batteries might be low. Try using the AC adapter or replace the batteries with new ones.
What to do if my Brother P-touch 2600, 2610 has locked up?
If your Brother Label Maker has locked up (nothing happens when a key is pressed), turn off the machine. While holding down the 'c' and 'R' keys, turn the machine back on. Note that this will erase the text and formats in the display and all text files stored in the memory.
Why is my Brother P-touch 2600, 2610 Label Maker printing striped tape?
If striped tape appears when using your Brother Label Maker, you have reached the end of the tape. Replace the tape cassette with a new one.
What to do if my Brother P-touch 2600, 2610 Label Maker does not print clearly?
If your Brother Label Maker is not printing or the printed characters appear blurred, ensure the tape cassette is correctly inserted and not empty (replace if needed). Also, verify that the tape compartment cover is closed and the interface cable is properly connected.
How to fix a blank display on my Brother P-touch 2600, 2610 Label Maker?
If your Brother Label Maker display is blank after turning it on, ensure the AC adapter is correctly connected. If using alkaline batteries, check they are properly inserted and replace them if they are low.
Why did my Brother P-touch 2600, 2610 Label Maker erase stored text files?
If text files stored in your Brother Label Maker's memory are missing, replace the batteries with new ones, as low batteries can cause data loss.
General| Brand | Brother |
|---|---|
| Model | P-touch 2600, 2610 |
| Category | Label Maker |
| Language | English |
Lists essential safety guidelines and precautions for using the P-touch machine.
Explains the battery requirements and how to install them correctly.
Lists the system configuration requirements before starting the installation on PCs.
Details the process of installing the P-touch Editor 3.2 application.
Guides installation of P-touch Editor 3.2 on Macintosh systems.
Guides installation of Quick Editor for Macintosh systems.
Guides on how to input and format text within the P-touch Editor.
Provides steps to remove P-touch Editor and Quick Editor software from a PC.
Instructions for uninstalling software and drivers on Macintosh.
Includes Delete, Accents, Symbols, Auto Formats, Stamps, Fonts, Styles, Frames, etc.
Explains how to initiate printing and handle text size adjustments.
Guides on saving text files, layouts, and settings in memory.
