23
9 Select the desired location for the alias,
and then click the Next button. A dialog
box appears, allowing you to check the
installation.
0 Check that the installation will be per-
formed as desired, and then click the
Install button. After P-touch Editor is
installed, a dialog box appears, indicating
that the installation is finished.
A Click the Done button, and then restart the
computer.
INSTALLING THE P-TOUCH QUICK EDITOR SOFTWARE
The P-touch Quick Editor software provides quick access to the more simple label-designing
features for easy text input and instant printing of labels. Install the P-touch Quick Editor soft-
ware onto a Macintosh as described below.
1 With the P-touch 2600/2610 and the Macintosh turned off, connect the P-touch to the
computer using the enclosed USB interface cable as described on page 6. Be sure to
leave the P-touch turned off.
2 Turn on the Macintosh.
3 Insert the enclosed CD-ROM into the com-
puter’s CD-ROM drive.
With a Mac OS before OS X:
To Next Page
Loading...
