47
EXAMPLE
With the
Frame
function, you can choose from various frames and highlights to design a more
decorative or emphasized label.
The default setting is
FRAME OFF
; however, the following six settings are also available.
When any setting other than
FRAME OFF
is selected, the
Undl/Frm
indicator on the right side
of the display comes on.
To change the frame setting:
1
While holding down
c
, press
6
once, and keep
c
held down to display the
current frame setting.
To select the UNDL ON underline setting:
1
While holding down
c
, press
5
once,
and keep
c
held down.
2
While still holding down
c
, continue pressing
5
until
UNDL ON
is displayed.
3
Release
c
.
OFF
UNDL
Caps
Alt
ON
UNDL
Caps
Alt
FRAME FUNCTION
To Next Page
Loading...
