50
To change the horizontal alignment setting:
1
While holding down
c
, press
R
once, and keep
c
held down to display the
current horizontal alignment setting.
2
While still holding down
c
, continue pressing
R
until the desired horizontal align-
ment setting is displayed.
3
Release
c
to apply the selected horizontal alignment setting to the entire text.
EXAMPLE
With this function, you can print your text so that the characters can be read from the tape side
of the tape. If mirror-printed labels are attached to glass or some other clear material, they can
be read correctly from the opposite side.
☞
When using the
Mirror printing
function, the text should be printed on clear tape.
The default mirror printing setting is
OFF
.
To select the RIGHT horizontal alignment setting:
1
While holding down
c
, press
R
once,
and keep
c
held down.
2
While still holding down
c
, continue press-
ing
R
until
RIGHT
is displayed.
3
Release
c
.
ON
LEFT
ALIGN
Caps
Alt
RIGHT
ALIGN
Caps
Alt
MIRROR PRINTING FUNCTION
To Next Page
Loading...
