To Next Page
M
Melissa JonesSep 1, 2025
What does 'Battery Weak!' mean on Brother Label Maker?
- CcrawfordjaySep 1, 2025
The 'Battery Weak!' message on your Brother Label Maker indicates that the installed batteries are getting weak.
What does 'Battery Weak!' mean on Brother Label Maker?
The 'Battery Weak!' message on your Brother Label Maker indicates that the installed batteries are getting weak.
What does 'Insert 18mm Tape Cassette!' mean on Brother Label Maker?
If your Brother Label Maker displays 'Insert 18mm Tape Cassette!', install an 18 mm tape cassette.
What does 'No Text!' mean on Brother Label Maker?
If your Brother Label Maker displays 'No Text!', enter data before attempting to print or preview a label.
What does 'Insert 6mm Tape Cassette!' mean on Brother Label Maker?
If your Brother Label Maker displays 'Insert 6mm Tape Cassette!', install a 6 mm tape cassette.
What does 'Insert 9mm Tape Cassette!' mean on Brother P-Touch 2730 Label Maker?
If your Brother Label Maker displays 'Insert 9mm Tape Cassette!', install a 9 mm tape cassette.
What does 'Input A,B,C or D At Start&End!' mean on Brother P-Touch 2730?
If your Brother Label Maker displays 'Input A,B,C or D At Start&End!', enter the bar code data correctly.
What does 'Insert Tape Cassette!' mean on Brother Label Maker?
If your Brother Label Maker displays 'Insert Tape Cassette!', install a tape cassette before printing or previewing a label.
What does 'Check Battery!' mean on a Brother P-Touch 2730 Label Maker?
If your Brother Label Maker displays 'Check Battery!', ensure you're using the correct batteries and that they are installed properly. Avoid mixing old and new batteries, or different types of batteries. Also, consider that the batteries might be running low.
Why does my Brother Label Maker stop printing mid-label?
If your Brother Label Maker stops while printing, check if striped tape is visible, which indicates the tape has run out and needs replacing. Also, replace all batteries or connect the AC adapter directly to the P-touch.
Why isn't my Brother P-Touch 2730 Label Maker cutting automatically?
If your Brother Label Maker is not cutting labels automatically, check that the Cut Option setting is not set to Chain or No Cut, as the tape will not feed after printing the label. Alternatively, hold down the Shift key and press the Preview key to feed and cut the tape.
General| Device Category | Label Maker |
|---|---|
| Print Resolution | 180 dpi |
| Print Method | Thermal Transfer |
| Tape Sizes | 3.5mm, 6mm, 9mm, 12mm, 18mm, 24mm |
| Label Width | Up to 24 mm |
| Keyboard | QWERTY |
| Cutter | Automatic |
| Connectivity | USB |
| Model | P-Touch 2730 |
| Print Speed | 10 mm/sec |
| Display | LCD |
| Power Source | 6 x AA Batteries or AC Adapter |
Important notes to prevent injury and damage using various symbols and their meanings.
Guidelines for safe and proper operation, including warnings about installation, usage, and maintenance.
Check the package contents before using your P-touch for the first time.
Instructions on how to power the P-touch using batteries or an AC adapter.
Connects the P-touch to a power outlet using the AC adapter for continuous operation.
Learn to input, modify, and manage text content for labels using the keyboard and features.
Instructions for printing the created label designs using various options.
Addresses common issues like unresponsive screen, display problems, and printing errors with solutions.
Explains various error messages displayed by the P-touch and provides remedies for each.
