EDITING A LABEL
48
Creating a Bar Code Label
Editing and Deleting a Bar Code
• To edit the bar code data position the cursor beneath either of the bar code marks
on the data entry screen and then open the Bar Code Input screen. Refer to “Entering
Bar Code Data” on page 46.
• To edit the “Width” and “Under#” settings on a bar code already placed on the screen,
position the cursor beneath either of the bar code marks on the data entry screen and
then open the Bar Code Setup screen. Refer to “Setting Bar Code Parameters” on
page 45.
• To delete a bar code from a label, position the cursor to right of the bar code marks
on the data entry screen and press the key.
17 41 FF 65 DEL
18 42 CR 66 FNC3
19 43 SO 67 FNC2
20 44 SI 68 FNC4
21 45 DLE 69 FNC1
22 46 DC1
23 47 DC2
Code Special Character Code Special Character Code Special Character
To Next Page
Loading...
