Brother P-touch PT-D400 P-touch PTD400AD - [Chain]

22
Setting Margin
LABEL PRINTING
 [Chain]
Use this setting when printing several labels with minimum margins.
NOTE
• When [Chain] is set, feed the tape before using the cutter otherwise
a part of the text may be cut off. Refer to “Feeding Tape” on page 9.
• The value XX displayed on the upper right corner of the LCD display
indicates the label length XX shown on the Label images below.
• Do not pull the tape since this may damage the tape cassette.
Enter text (ABC)  ()  / [Margin]  / [Chain]  () or
()
 ()  / Select the number of copies  (), () or
()
 The message [OK to Feed?] appears  ()  Clear the text and
enter text for the next label (DEF)
 ()  / Select the number of copies
 ( ), ( ) or ( )  The message [OK to Feed?] appears  () or
( ) to feed the tape.
ABC
DEF
9.5 mm
LCD display Label image
Full
Half
Narrow
ABC
XX mm
ABC
XX mm
ABC
XX mm
w ww. . com
information@itm.com1.800.561.8187