Brother P-touch PT-D400 User Manual

20
Label Preview
LABEL PRINTING
Label Preview
You can preview the text before printing.
Press or to scroll the preview to the left or right.
Press or to change the magnification of the preview.
Printing Labels
To cut off the label, press the tape cutter lever on the upper left corner of
the machine.
NOTE
• To prevent damage to the tape, do not touch the cutter lever while the
message [Printing...Copies] or [Feeding Tape...Please Wait] is
displayed.
• Do not pull the label coming out of the tape exit slot. Doing so will
cause the ink ribbon to be discharged with the tape, making the tape
no longer usable.
• Do not block the tape exit slot during printing or when feeding tape.
Doing so will cause the tape to jam.
 Single and Multiple Copy Printing
NOTE
• If you need only 1 copy of the label, press ( ), ( ) or ( )
without selecting the number of copies.
• The number of copies can also be specified by pressing a number
key.
 Cable Flag Printing
().
() Î / Change the number of copies Î ( ), ( ) or ( ).
() + () Î / [Cable] Î ( ) or ( ) Î
( ), ( ) or ( ).

Brother P-touch PT-D400 Specifications

General

Model	PT-D400
Series	P-touch
Device Category	Label Maker
Print Method	Thermal transfer
Print Resolution	180 dpi
Tape Sizes	3.5mm, 6mm, 9mm, 12mm, 18mm
Tape Type	TZe
Keyboard Type	QWERTY
Display	LCD
Cutter Type	Manual
Maximum Tape Width	0.70" (18 mm)
Label Width	Up to 18mm
Display Size	2 lines, 15 characters
Power Source	AC Adapter or Battery
AC Adapter Model	AD-24
Styles	Normal, Outline, Shadow, Italic, Bold, Bold Italic
Fonts	6 fonts
Weight	1.1 kg (without batteries)