Brother P-touch PT-D400 User Manual

GETTING STARTED
9
Turning Power On/Off
NOTE
• When inserting the tape cassette, make sure that the tape and ink
ribbon do not catch on the print head.
• If you cannot close the tape compartment cover, check to ensure the
release lever is in the up position. If not, lift the lever, and then close
the cover.
Turning Power On/Off
Press ( ) to turn the P-touch labeler on.
Press ( ) again to turn the P-touch labeler off.
NOTE
Your P-touch labeler has a power saving function that automatically
turns itself off if no key is pressed within a certain time under certain
operating conditions. Refer to “Specifications” on page 30.
Feeding Tape
To feed the tape, press the following keys:
Setting LCD Display
 LCD Contrast
The default setting is [0].
Setting Unit and Language
 Unit
The default setting is [mm].
 Language
The default setting is [English].
() + ().
() Î / [Adjustment] Î ( ) or ( ) Î / [LCD Contrast] Î
/ [-2 - +2]
Î () or ( ).
() Î / [Unit] Î ( ) or ( ) Î / [mm/inch] Î () or ( ).
() Î / [Language] Î ( ) or ( ) Î / [English/Español/
Français/Hrvatski/Italiano/Magyar/Nederlands/Norsk/Polski/Português/
Português(Brasil)/Română/Slovenski/Slovenský/Suomi/Svenska/Türkçe/
Čeština/Dansk/Deutsch]
Î ( ) or ( ).

Brother P-touch PT-D400 Specifications

General

Model	PT-D400
Series	P-touch
Device Category	Label Maker
Print Method	Thermal transfer
Print Resolution	180 dpi
Tape Sizes	3.5mm, 6mm, 9mm, 12mm, 18mm
Tape Type	TZe
Keyboard Type	QWERTY
Display	LCD
Cutter Type	Manual
Maximum Tape Width	0.70" (18 mm)
Label Width	Up to 18mm
Display Size	2 lines, 15 characters
Power Source	AC Adapter or Battery
AC Adapter Model	AD-24
Styles	Normal, Outline, Shadow, Italic, Bold, Bold Italic
Fonts	6 fonts
Weight	1.1 kg (without batteries)