Brother P-touch PT-P750W - Using P-touch Editor

Printing from Computers
8
2
Using P-touch Editor 2
You will need to install P-touch Editor and the printer driver to use your P-touch labeler with your computer.
To download the latest driver and software, please visit the Brother Solutions Center at:
http://support.brother.com/
When printing via a USB connection, check that the Editor Lite lamp is not lit. If the Editor Lite lamp is lit, press
and hold down the Editor Lite button until the lamp goes off.
Using P-touch Editor (For Windows
®
) 2
Starting P-touch Editor 2
a For Windows Vista
®
/ Windows
®
7 / Windows Server
®
2008/2008 R2
From the Start button, click [All Programs]-[Brother P-touch]-[P-touch Editor 5.1].
When P-touch Editor starts, select whether you want to create a new layout or open an existing layout.
For Windows
®
8/ Windows
®
8.1 / Windows Server
®
2012/2012 R2
Click [P-touch Editor 5.1] on [Apps] screen or double-click [P-touch Editor 5.1] on the desktop.
When P-touch Editor starts, select whether you want to create a new layout or open an existing layout.
Note
• You can also start P-touch Editor using shortcuts, if you chose to create shortcuts during installation.
• Shortcut icon on the desktop: double-click to start P-touch Editor
• Shortcut icon in the Quick Launch bar: click to start P-touch Editor
• To change how P-touch Editor functions when it starts, click [Tools]-[Options] in the P-touch Editor menu
bar to display the [Options] dialog box. On the left side, select the [General] heading and then the desired
setting in the [Operations] list box under [Startup Settings]. The default setting is [Display New View].