GETTING STARTED
10
QL-500/550 Components
QL-500/550 Label Printer
Front
Back
QL-500/550 Components
QL-500 QL-550
FEED button
LED lamp
ON/OFF button
CUT lever
DK Roll compartment cover
FEED button
LED lamp
ON/OFF button
CUT button
DK Roll compartment cover
If the DK Roll compartment cover is left open, dust will collect on the print head. Always close the cover.
QL-500/QL-550
Power cord
USB port
Do not connect the QL-500/550 to the USB port of your personal computer yet.
Do not connect the QL-500/550 to your personal computer until
directed to do so when installing the printer driver. If the QL-
500/550 is connected to a personal computer that does not have
the printer driver software installed, the dialog box shown here
will appear. Click [Cancel], remove the USB cable, and then
install the printer driver software.
Refer to “Installing the Software” on page 16.
To Next Page
Loading...
