What does 'Length Limit!' mean on Brother Label Maker?
This message indicates that the data you are trying to print does not fit the current label size. Select a bigger label size or modify the content and settings to fit.
What to do if my Brother Label Maker displays 'Please Insert Label Roll!'?
This message appears when printing or cutting is attempted without a DK Roll being set. Install the DK Roll into your Brother Label Maker.
What to do if the label gets jammed in my Brother P-touch QL-650TD Label Maker?
If the label is jamming or not ejecting properly: * The cutter blade might be dull; replace the cutter unit. * Foreign objects or dust might be on the roller; clean the roller using the cleaning sheet. * The label outlet might be stained; remove stains from the label outlet.
How to reset Brother P-touch QL-650TD Label Maker to factory settings?
To clear the printer settings and data transferred from a PC: turn the printer OFF. Hold the Up arrow button and the Feed button while pressing the ON/OFF button. Release all buttons when the display shows “OK to initialize ?” then press the OK button. All downloaded data and settings transferred from the PC will be cleared, and the printer will be reset. Note that the clock and date settings will not be cleared.
What does 'Paper Cannot be Fed!' mean on my Brother P-touch QL-650TD Label Maker?
This message indicates that the DK Roll is misfeeding or has run out. Try setting the DK Roll properly again. If the DK Tape is depleted, replace it with a new roll.
How to fix Brother P-touch QL-650TD Label Maker Cutter Error!
A Cutter Error indicates that the cutter is not located at the home position. Turn off the printer, wait 30 seconds, and then turn it on again.
Why is the icon of P-touch Add-In not displayed on Microsoft® Word?
If the P-touch Add-In icon is not displayed in Microsoft® Word, ensure Microsoft® Outlook® is not running and that Microsoft® Word is selected as your email editor. Quit Microsoft® Outlook®, and restart Microsoft® Word.
How to fix poor print quality on Brother P-touch QL-650TD Label Maker?
If the print quality is poor, the print head or roller might be damaged or stained. Clean the roller.
Why is the LED lamp not lighting up on my Brother Label Maker?
If the LED lamp is not lighting up, first check that the power cord is properly connected. If it is, try connecting it to another outlet.
What to do if Brother P-touch QL-650TD displays Data transmission error on PC?
If a data transmission error is displayed on your PC, check that the correct port is selected from [print to the port below] in the printer property dialog box.
Details the one-year limited warranty and replacement service for the printer in the USA.
Provides key support contact details and website information for the printer.
Lists the manuals provided with the printer and their purpose.
Outlines critical safety warnings and precautions to prevent injury or damage.
Covers general advice and precautions for using the printer, DK rolls, and accessories.
Lists all items included in the printer package for user verification.
Details and identifies the various physical parts of the printer unit.
Provides instructions on how to properly load and set the DK Roll into the printer.
Explains how to attach the paper guide to the printer for label sheet handling.
Guides the user on how to connect the printer to a power source.
Instructions for setting the printer's internal clock, language, and measurement units.
Outlines the general steps involved in creating and printing a label using the printer.
Guides users on choosing a pre-built template for label creation.
Instructions on how to print a selected label template.
Allows modification of existing label templates to customize content and layout.
Procedure for setting or adjusting the printer's internal clock.
How to change the display language of the printer's interface.
Allows selection of measurement units for the printer.
Describes the software included for Windows, such as P-touch Editor.
Important precautions and considerations before installing software on Windows.
Step-by-step guide for installing the printer software on Windows.
Describes the software included for Macintosh, such as P-touch Editor.
Important precautions and considerations before installing software on Macintosh.
Step-by-step guide for installing the printer software on Macintosh.
Covers essential maintenance tasks for the printer's longevity.
Addresses frequent problems and provides solutions for smooth operation.
Explains the meaning of various error codes and messages.
Provides detailed technical specifications and operating requirements for the printer.
Lists optional accessories and supplies for the Brother printer.
General| Print Technology | Direct Thermal |
|---|---|
| Display | LCD |
| Print Resolution | 300 dpi |
| Connectivity | USB |
| Label Types | Die-Cut, Continuous |
| Compatible Label Widths | 62 mm |
| Maximum Resolution | 300 dpi |
| Power Source | AC Adapter |
To Next Page