Need help?Do you have a question about the Brother P-touch QL-710W and is the answer not in the manual?
General| Maximum Label Width | 62 mm |
|---|---|
| Resolution | 300 dpi |
| Cutter | Automatic |
| Device Category | Label Maker |
| Power Source | AC adapter |
| Printing Technology | Thermal |
| Connectivity | USB, Wi-Fi |
| Media Type | Die-cut labels, Continuous labels |
| Supported OS | Windows, Mac |
Introduces the service manual's scope, target audience, and structure.
Details on external appearance, buttons, LEDs, display, and print mechanism.
Specifications for thermal tape types, sizes, and the cutter mechanism.
Information on PC interface methods, supported OS, and printer emulation.
Details on character generator and power supply specifications.
Explains the operation of print, tape feed, and cutter mechanisms.
Describes the components and block diagrams of the control electronics.
Details the components and block diagram of the main PCB.
Essential safety guidelines for handling electronic components and performing service.
Lists required screw torque values and lubrication points for assembly.
Step-by-step instructions for dismantling the printer unit component by component.
Step-by-step instructions for reassembling the printer unit component by component.
Precautions before troubleshooting and verification steps after repairs.
Explains status LED behavior for different error conditions and their meanings.
Lists common error messages and provides corresponding advice or solutions.
Provides step-by-step diagnostic flows for common operational problems.
Overview of VR Adjustment Tool and Serviceman Software Tool.
Explains the purpose and steps for performing VR adjustment.
Important precautions for performing inspections using the software.
Procedure for reading the machine's serial number using the tool.
Procedure to check the wired LAN MAC address for the QL-720NW model.
Process for writing media information into the machine.
Checks if the photo sensor correctly detects the white level of media.
Checks if the photo sensor correctly detects the black level of media.
Verifies temperature readings and the functionality of the WiFi button.
Checks the proper operation of media and cover sensors.
Verifies that the tape is fed and cut correctly.
Adjusts and tests the top margin for free length tape printing.
Starts the wireless LAN module to prepare for connection.
Acquires and checks the wireless LAN MAC address from the machine's EEPROM.
Stops the wireless LAN module of the machine.
Writes serial number, EEPROM version, and WiFi settings into the machine.
To Next Page