Brother P-touch QL-710W User Manual

1 - 32
1.16 Stop WiFi module
Stops the WiFi module in the machine from the tool.
(1) Check that the inspection item on the main screen is highlighted in yellow, then
click the [Run] button.
Fig. 53 “Stop WiFi module” start-up
(2) Inspection is completed when “OK” is displayed at the left of the inspection item
field. Check that the WiFi indicator is not lit.
Fig. 54 “Stop WiFi module” OK

Brother P-touch QL-710W Specifications

General

Maximum Label Width	62 mm
Resolution	300 dpi
Cutter	Automatic
Device Category	Label Maker
Power Source	AC adapter
Printing Technology	Thermal
Connectivity	USB, Wi-Fi
Media Type	Die-cut labels, Continuous labels
Supported OS	Windows, Mac