Brother P-touch QL-710W - Removing the Panel Cover

III - 8
[2] Removing the Panel Cover
(1) Turn the machine upside down.
(2) Remove the four screws, and then remove the lower plate ASSY from the under
cover.
Fig. 3.4-6 Removing the Panel Cover (1)
(3) Disconnect the connector CN3 of the SB PCB ASSY from the main PCB ASSY.
Fig. 3.4-7 Removing the Panel Cover (2)
Screws
Screws
Lower plate ASSY
Under cover
CN10
CN8
CN3
CN9
CN6
CN1
CN7
CN5
CN4
CN2
Main PCB ASSY