EasyManuals Logo

Brother P-touch QL-710W User Manual

Brother P-touch QL-710W
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
II - 8
2.2.4 Button, LED PCB (SB PCB ASSY)
This is the PCB equipped with ON/OFF button, Feed button, Cut button, Wi-Fi button,
cover open sensor, LED lamp (Green/Red) and Green LED.
2.2.5 Cutter Sensor (Cutter Home Position Detect Sensor)
This sensor detects existence of the cutter at its home position (micro switch).
2.2.6 Media Feed Motor (Tape Feed Motor ASSY)
The media feed motor supplies the drive power to feed media. This motor is step
motor with 35 diameter, and drive voltage is 25V.
2.2.7 Full Cutter Motor (Cutter Motor ASSY)
The cutter motor supplies the drive power to cut media. This motor is a DC motor of
which drive voltage is V
H (25V).
2.2.8 Thermal Head
Thermal head is thick film and drive built-in type thermal head, which consists of 720
dots by one row/300dpi. The drive voltage is V
H (25V).
2.2.9 Wi-Fi PCB ASSY
Wi-Fi PCB ASSY that consists of CPU, antenna etc. performs Wi-Fi wireless
transmitting/receiving.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother P-touch QL-710W and is the answer not in the manual?

Brother P-touch QL-710W Specifications

General IconGeneral
Maximum Label Width62 mm
Resolution300 dpi
CutterAutomatic
Device CategoryLabel Maker
Power SourceAC adapter
Printing TechnologyThermal
ConnectivityUSB, Wi-Fi
Media TypeDie-cut labels, Continuous labels
Supported OSWindows, Mac

Related product manuals