Why does the Brother PJ-723 Printer DATA indicator turn off while a page is still in the printer?
If the DATA indicator turns off while a page remains in the Brother printer, the computer or mobile device may not have sent a full page of data, or the wrong page size information, or the size of the loaded paper is wrong. Try printing the document again.
What to do if Brother Printer is placed too far from my mobile device?
If your Brother printer is placed too far from your mobile device, move your printer within about 3.3 feet (1 meter) of the mobile device when you configure the Wi-Fi network settings.
How to confirm IP address and Subnet Mask for Brother PJ-723?
To confirm the IP address and the Subnet Mask for your Brother printer, confirm the IP address and the Subnet Mask. Verify that both the IP addresses and Subnet Masks of your computer and your printer are correct and located on the same network. Confirm your IP address, Subnet Mask and other network settings using the Printer Setting Tool.
What to do if I am using MAC Address filtering with Brother Printer?
If you are using MAC Address filtering, you can confirm the MAC address by printing the printer settings report.
What to do if wireless devices are near my Brother PJ-723?
If a wireless computer, Bluetooth supported device, microwave oven or digital cordless phone is near the printer or the Wi-Fi access point/router, move other devices away from the printer.
What to do if I did not choose to allow access when the security alert dialog box appeared for Brother PJ-723 Printer?
If you did not choose to allow access when the security alert dialog box appeared, the firewall function of your security software may be blocking access. Some security software might block access without showing a security alert dialog box.
What to do if my Brother PJ-723 Printer is not detected via Wi-Fi?
If your Brother printer (PJ-773 only) is not detected when establishing a Wi-Fi connection, check that the (Wi-Fi) indicator is lit in blue. If the (Wi-Fi) indicator is flashing or turned off, the Wi-Fi connection is not established. You can also check the Wi-Fi settings, print the printer settings, or specify the correct Wi-Fi settings in the Printer Setting Tool, consulting with the network administrator if needed.
What to do if Brother Printer prints blank pages?
If your Brother printer feeds paper but nothing appears on the paper, ensure you are using thermal paper. Also, the print surface must face the back when looking from the front of the printer. You can also check the print density setting using the Printer Setting Tool.
What to do if the Brother PJ-723 paper feeds through but nothing prints?
If paper feeds through your Brother printer but nothing appears on it, make sure you are using thermal paper and that the print surface faces the back when looking from the front of the printer.
What to do if my Brother PJ-723 ejects a partially printed page?
If your Brother printer ejects a partially printed page, ensure you are using the correct paper size setting.
General| Print Technology | Direct Thermal |
|---|---|
| Resolution | 300 dpi |
| Maximum Print Speed | 8 pages per minute |
| Interface | USB |
| Dimensions | 255 mm x 55 mm x 30 mm |
| Weight | 0.48 kg |
| Power Source | AC Adapter |
| Paper Size | A4 |
Details common printer problems and their corresponding indicator light messages.
Describes the operation of each button on the printer unit.
Instructions for installing, removing, charging, and using the optional battery.
Guides on connecting the printer to AC or DC power sources for operation.
Procedure for powering the printer on and off correctly.
Steps for installing necessary software for printer functionality.
Methods for establishing a connection between the printer and devices.
Detailed guide on printing documents from Windows or Mac computers.
Tool for configuring printer communication, device, and template settings on Windows.
Tool for configuring printer communication and device settings on Mac.
Specifies wireless LAN and Bluetooth communication settings for the printer.
Adjusts advanced printer settings like power management and print options.
Configures settings for using P-touch Template mode for label printing.
Allows the printer to act as a USB storage device for file transfer.
Procedure for cleaning the printer's platen roller to ensure print quality.
Step-by-step guide to safely remove jammed paper from the printer.
Guides on transferring the .pdz package file to the printer.
Guides for configuring network settings like IP address and Wi-Fi.
Troubleshooting steps for Wi-Fi and network connection issues.
Diagnosing and resolving issues when the printer is not found on the network.
Guides on setting up IP addresses, subnet masks, and gateways for network connection.
To Next Page
