Brother PJ-763 User Manual (English)

Other manuals for Brother PJ-763

Online User's Guide165 pages

User Guide7 pages

Command Reference62 pages

Questions and Answers:

J
jody88Aug 27, 2025
What to do if my Brother Printer is not detected via Wi-Fi?
- M
  Mark RodriguezAug 28, 2025
  If your Brother printer (PJ-773 only) is not detected when establishing a Wi-Fi connection, check that the (Wi-Fi) indicator is lit in blue. If the (Wi-Fi) indicator is flashing or turned off, the Wi-Fi connection is not established. You can also check the Wi-Fi settings, print the printer settings, or specify the correct Wi-Fi settings in the Printer Setting Tool, consulting with the network administrator if needed.
A
Ashley KellerAug 27, 2025
What to do if Brother Printer prints blank pages?
- C
  cookjillianAug 27, 2025
  If your Brother printer feeds paper but nothing appears on the paper, ensure you are using thermal paper. Also, the print surface must face the back when looking from the front of the printer. You can also check the print density setting using the Printer Setting Tool.
R
riverasabrinaAug 26, 2025
What to do if the Brother Printer paper feeds through but nothing prints?
- J
  Jaime SmithAug 26, 2025
  If paper feeds through your Brother printer but nothing appears on it, make sure you are using thermal paper and that the print surface faces the back when looking from the front of the printer.
C
Charles ButlerAug 25, 2025
What to do if my Brother PJ-763 ejects a partially printed page?
- A
  Audrey MarquezAug 26, 2025
  If your Brother printer ejects a partially printed page, ensure you are using the correct paper size setting.
M
matthew76Aug 23, 2025
What to do if the Brother Printer DATA indicator remains green but doesn't print?
- M
  mathisashleyAug 23, 2025
  If the DATA indicator is lit but your Brother printer isn't printing, it could be due to several reasons. First, the printer might still be processing received data, so wait until it finishes. Ensure paper is loaded; if it is, try removing and reloading it. You can also try turning the printer off and on again. If sending simple ASCII text data, the printer may be waiting for a CR/LF command at the end of lines or a form feed command at the end of the last line. Print another page, or press the (Feed) button. Finally, the printer may have started in mass storage mode; in that case, turn it off and on again.
B
belldeniseSep 14, 2025
What to do if Brother PJ-763 Printer is placed too far from my mobile device?

Brother PJ-763 Specifications

General

Type	Mobile printer
Print speed	8 ppm
Print technology	Thermal
Maximum resolution	300 x 300 DPI
Bluetooth	Yes
Bluetooth version	2.0+EDR
Bluetooth profiles	BIP, HCRP, OPP, SPP
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Product color	Black
Flash memory	6 MB
RAM capacity	32 GB
Certification	Citrix ready
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	20 - 80 %
Wi-Fi	No
Package weight	980 g
Cables included	USB
Maximum media length	279.4 mm
Maximum printing width	208.8 mm
Harmonized System (HS) code	84433210