Brother PJ662 PocketJet 6 Print Engine with Bluetooth User Guide

Chapter 1
2
Connecting to a DC Power
Outlet (Optional) 1
Connect the printer to your vehicle’s 12 V DC
power outlet (cigarette lighter, etc.) to power
the printer or charge the rechargeable battery
using the vehicle’s DC power.
a Connect the DC cable to the vehicle’s 12
V DC power outlet.
b Connect the DC cable to the printer.
c Turn on the vehicle’s power, and then
turn on the printer.
1 DC cable
Note
• The DC cable is an optional accessory.
• The voltage supplied by a vehicle
fluctuates. The printing speed may differ
depending on the supplied voltage.
Using the
Rechargeable Ni-MH
Battery (Optional)
1
Installing the Rechargeable
Ni-MH Battery 1
a Open the battery cover by pressing the
cover latch.
1 Battery cover
2 Cover latch
b Swing the cover open and remove it.
c Gently insert the battery connector into
the terminal on the inside of the battery
compartment.
3Terminal
4 Battery connector
1
2
1
4
3

Brother PJ662 PocketJet 6 Print Engine with Bluetooth Specifications

General

Brand	Brother
Model	PJ662 PocketJet 6 Print Engine with Bluetooth
Category	Printer
Language	English