Scanning
25
3
g Make sure your machine is selected.
Do one of the following:
If your machine is selected, go to step i.
If a different machine is selected or if No Device selected is displayed, make sure your machine is
turned on and then tap Scanner. Go to step h.
h The application will search your network and display a list of available machines. Tap your machine in
the list.
i Do one of the following:
To change other scan settings, see Scan Settings on page 28. After changing the settings, go to
step j.
If you do not want to change any other settings, press the Back button and go to step j.
To Next Page
Loading...
Need help?
General